Model |
MICROSCAN-B2-PFM |
|---|---|
Eyepiece |
Wide field WF10X |
Objective |
Infinity plan achromatic Objectives PL 4X/0.10 |
Infinity plan achromatic Objectives PL 10X/0.25 |
|
Infinity plan achromatic Objectives PL 40X/0.65(Spring) |
|
Infinity plan achromatic Objectives PL 100X/1.25(Spring, oil) |
|
Eyepiece tube |
Trinocular eyepiece tube with 4 numbers antifungal eye piece with interpupillary adjustment and magnification of 10X / FOV 20 and 22mm or higher. Light distribution 2 way (100/0 and 0/100). |
Focus system |
Coaxial coarse/fine focus, with tensional adjustable and up stop minimum division of fine focusing: 2μm. |
Nosepiece |
Quadruple(Backward ball bearing inner locating) |
Stage |
Super hard ceramic coated mechanical X/Y stage, rust free, scratch proof, with vernier calibration, should hold two slides firmly. |
Condenser |
High quality condenser (10X-100X objective magnification), Upright, universal turret type for bright field and fluorescence imaging. |
Light source |
LED 4W, Uniform light distribution, Intensity controller, having life span of more than 40,000 hrs. |
Fluorescent illumination |
100W mercury fluorescent illumination and should have intensity controller, three or more filters (UV, Blue and Green excitation) and four position rotating filter turret. |
Objectives and Objective Turret: |
Four or more position nose piece and facing inward. Harmonic corrected antifungal PLAN objectives for fluorescent and bright field microscopy; 10X, 40X and 100X objectives. |
Power supply |
12V DC, 1.5A (for mains 100-240V AC, 47-63 Hz,) with voltage stabilizer. |